PoE injector, 60 W, RJ45 jack on screw

Code: INJ 2111-T

PoE injector, 60 W, RJ45 jack on screw






 INJ 2111-T - Injector

PoE injector, 60 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection

Data: Power over Ethernet

Serial transmission speed:10/100/1000 Mbps

Frequency range: 125 MHz

Connection method: Screw connection

Note on the connection method: CAT5e

No. of channels: 1

Tightening torque: 0.22 Nm ... 0.25 Nm

Pin assignment: 1:1

Transmission length: 100 m (including patch cables)

Single conductor/terminal point, rigid: 0.14 mm² ... 1.5 mm²

Single-wire/terminal point, flexible: 0.14 mm² ... 1.5 mm²

Max. AWG conductor cross section, flexible: 16

Min. AWG conductor cross section, flexible: 28

Single-wire/terminal point, rigid AWG max.: 16

Single-wire/terminal point, rigid AWG min.: 28

Stripping length:5 mm

Output nominal voltage: 54 V DC (PoE)

Output power: 60 W

Maximum output power: 75 W (UL)

 INJ 2111-T - Injector

PoE injector, 60 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection

Data: Power over Ethernet

Serial transmission speed:10/100/1000 Mbps

Frequency range: 125 MHz

Connection method: Screw connection

Note on the connection method: CAT5e

No. of channels: 1

Tightening torque: 0.22 Nm ... 0.25 Nm

Pin assignment: 1:1

Transmission length: 100 m (including patch cables)

Single conductor/terminal point, rigid: 0.14 mm² ... 1.5 mm²

Single-wire/terminal point, flexible: 0.14 mm² ... 1.5 mm²

Max. AWG conductor cross section, flexible: 16

Min. AWG conductor cross section, flexible: 28

Single-wire/terminal point, rigid AWG max.: 16

Single-wire/terminal point, rigid AWG min.: 28

Stripping length:5 mm

Output nominal voltage: 54 V DC (PoE)

Output power: 60 W

Maximum output power: 75 W (UL)